Control Valve Body Assembly Removal
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Body Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Bolt M5 x 73 (Quantity: 6) Tip: Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated. |
| 2 | Control Valve Body Assembly
NOTE:
Use care when handling the control valve body assembly. If dropped, damage to the internal components of the control solenoid valve assembly, including the transmission control module (TCM), may result.
|
| 3 | Fluid Pump Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|
| 4 | Fluid Pump Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|
| 5 | Center Support Fluid Passage Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|