Control Solenoid Valve Assembly Removal

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Control Solenoid Valve Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Bolt M5 x 53 (Quantity: 2)
2	Bolt M5 x 55 (Quantity: 4)
3	Bolt M5 x 45 (Quantity: 5)
4	Control Solenoid (w/Body and TCM) Valve Assembly NOTE: Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result.
5	Filter Plate Assembly NOTE: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination. NOTE: Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly.