LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Specifications >> Output Shaft Selective Thrust Washer Specifications

Output Shaft Selective Thrust Washer Specifications

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Output Shaft Selective Thrust Washer Specifications

Identification Notch Numeral Specification
Metric English
None 1 1.880-1.981 mm 0.074-0.078 in
On the side of 1 tab 2 2.083-2.184 mm 0.082-0.086 in
On the side of 2 tabs 3 2.286-2.388 mm 0.090-0.094 in
On the end of 1 tab 4 2.489-2.591 mm 0.098-0.102 in
On the end of 2 tabs 5 2.692-2.794 mm 0.106-0.110 in
On the end of 3 tabs 6 2.896-2.997 mm 0.114-0.118 in
scientia non olet · About LEMON Manuals