LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Wiring Harness Installation

Wiring Harness Installation

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Wiring Harness
    GM1236990Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW pass thru O-ring seal (36).
  2. Install the wiring harness assembly (34) into the case.
  3. Connect the wiring harness assembly (34) to the electrical components.
  4. Place the wiring harness assembly (34) under the wiring harness clamps (33).
scientia non olet · About LEMON Manuals