LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Overdrive Assembly Removal

Overdrive Assembly Removal

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Turbine Shaft
GM774705Courtesy of GENERAL MOTORS CORP.
IMPORTANT: The overdrive assembly includes the turbine shaft, overrun clutch housing assembly and the overdrive carrier assembly.

Remove the overdrive assembly by grasping the turbine shaft (502) and lifting.