LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Output Shaft Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

J 41505  Output Shaft Seal Installer. See Special Tools .

    Fig 1: Using J 41505 To Install Output Shaft Seal
    GM28419Courtesy of GENERAL MOTORS CORP.
  1. Using the J 41505  , install a new output shaft seal (13). See Special Tools .
  2. Fig 2: Locating Output Shaft Seal Retainer Ring
    GM28420Courtesy of GENERAL MOTORS CORP.
  3. Install the output shaft seal retainer ring (14).