LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Manual 2-1 Band Servo Assembly Assemble

Manual 2-1 Band Servo Assembly Assemble

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Manual 2-1 Band Servo Assembly
    GM335069Courtesy of GENERAL MOTORS CORP.
  1. Install a new manual 2-1 band servo piston seal (57) onto the manual 2-1 band servo piston (58).
  2. Install the manual 2-1 band servo piston pin (55) into the manual 2-1 band servo piston (58).
  3. Install the manual 2-1 band servo piston pin retainer ring (56).