LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Forward Clutch Hub Assemble >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

J 36850  Transjel® Lubricant

    Fig 1: View Of Direct Clutch Hub Retainer Ring
    GM31084Courtesy of GENERAL MOTORS CORP.
  1. Remove the direct clutch hub retainer ring (616).
  2. Remove the direct clutch hub (615).
    3. Fig 2: Identifying Direct & Forward Clutch Housing Thrust Washer
    GM31086Courtesy of GENERAL MOTORS CORP.
  3. Install the forward clutch housing thrust washer (612) (bronze) on the inside of the forward clutch hub (613). Retain the thrust washer with J 36850  or equivalent.
  4. Install the direct clutch housing thrust washer (614) (plastic) on the outside of the forward clutch hub (613). Retain the thrust washer with J 36850  or equivalent.
    5. Fig 3: View Of Forward Clutch Housing Assembly
    GM31087Courtesy of GENERAL MOTORS CORP.
  5. Install the forward clutch hub (613) into the forward clutch housing assembly (602). Rotate the hub slightly in each direction in order to ease installation.
  6. Install the direct clutch hub (615) into the forward clutch housing assembly (602).
  7. Install the direct clutch hub retainer ring (616).
scientia non olet · About LEMON Manuals