LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Specifications >> Third and Fourth Clutch Backing Plate Selection

Third and Fourth Clutch Backing Plate Selection

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
3rd and 4th Clutch Backing Plate Selection Table

Dimension Identification
5.88-5.68 mm (0.231-0.224 in) A
4.99-4.76 mm (0.196-0.187 in) B
4.10-3.90 mm (0.161-0.154 in) C
Use a backing plate which gives the correct travel. The travel should be 2.10-0.90 mm (0.083-0.035 in).
scientia non olet · About LEMON Manuals