Reverse Input Clutch Disassemble

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 23327-1 Forward Clutch Spring Compressor (Bridge). See Special Tools .
J 25018-A Clutch Spring Compressor Adapter. See Special Tools .

Fig 1: Locating Reverse Input Clutch Plates

Courtesy of GENERAL MOTORS CORP.

Remove the reverse input clutch retaining ring (614).
Remove all reverse input clutch plates (611-613).

Fig 2: View Of Reverse Input Clutch Spring Retainer Ring

Courtesy of GENERAL MOTORS CORP.

Install the J 23327-1 and the J 25018-A . See Special Tools .
Compress the reverse input clutch spring assembly.
Remove the reverse input clutch spring retainer ring (610).

Fig 3: Identifying Reverse Input Clutch Spring & Piston Assemblies

Courtesy of GENERAL MOTORS CORP.

Remove the reverse input clutch spring assembly (609).
Remove the reverse input clutch piston assembly (607).