LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reverse Input Clutch Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Reverse Input Clutch Front Bushing
    GM7872Courtesy of GENERAL MOTORS CORP.
  1. Using the J 25019-9  with the J 8092  , install a reverse input clutch front bushing (603). See Special Tools .
    2. Fig 2: View Of Reverse Input Clutch Rear Bushing
    GM7874Courtesy of GENERAL MOTORS CORP.
  2. Using the J 34196-3 which is part of kit J 34196-B  with the J 8092  , install a reverse input clutch rear bushing (606). See Special Tools .
scientia non olet · About LEMON Manuals