LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reaction Gear and Carrier Installation >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

J 36850  Transjel Lubricant

    Fig 1: View Of Reaction Carrier/Support Thrust Bearing Assembly
    GM190451Courtesy of GENERAL MOTORS CORP.
  1. Install the reaction gear support to case bearing (692) onto the internal reaction gear support (685). Retain the bearing using J 36850  or equivalent.
  2. Install the internal reaction gear (684) and the internal reaction gear support (685) into the case.
  3. Install the reaction carrier/support thrust bearing assembly (683) into the internal reaction gear support (685). Retain bearing with J 36850  .
  4. Fig 2: Identifying Reaction Carrier Assembly
    GM190447Courtesy of GENERAL MOTORS CORP.
  5. Install the reaction carrier assembly (681) into the internal reaction gear.