LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reaction Carrier Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Carrier Shaft Front Bushing & Special Tools J 34196-B & J 8092
    GM5476Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a new reaction carrier shaft front bushing (665). See Special Tools .
  2. Fig 2: View Of Reaction Carrier Shaft Rear Bushing
    GM5477Courtesy of GENERAL MOTORS CORP.
  3. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a reaction carrier shaft rear bushing (667). See Special Tools .