LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Oil Pump Stator Shaft Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Special Tools J 21465-2, J 8092 & New Stator Shaft Front Bushing
    GM1552960Courtesy of GENERAL MOTORS CORP.
  1. Using the J 21465-2  (1) and the J 8092  (2), install a new stator shaft front bushing (234). See Special Tools .
    2. Fig 2: Identifying Special Tools J 34196-B, J 8092 & Stator Shaft Rear Bushing
    GM1552961Courtesy of GENERAL MOTORS CORP.
  2. Using the J 34196-2 (1) which is part of kit J 34196-B  and the J 8092  (2), install the stator shaft rear bushing (241). See Special Tools .
scientia non olet · About LEMON Manuals