Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

J 21368 Pump Body and Cover Alignment Band. See Special Tools .

Fig 1: View Of Oil Pump Cover & Oil Pump Body

Courtesy of GENERAL MOTORS CORP.

Place the oil pump cover onto the oil pump body and put stator shaft through a hole in the bench.
Install the pump cover bolts (233) finger tight only.

Fig 2: Identifying Pump Cover Bolts

Courtesy of GENERAL MOTORS CORP.

Install the J 21368 . See Special Tools .

NOTE: Refer to Fastener Notice .

Tighten the pump cover bolts (233).
Tighten: Tighten the bolts to 24 N.m (18 lb ft).
Remove the J 21368 . See Special Tools .