LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Inner Manual Linkage Removal

Inner Manual Linkage Removal

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspecting Inner Manual Linkage
    GM880293Courtesy of GENERAL MOTORS CORP.
  1. Remove the following parts:
    1. Hex head nut (90)
    2. Manual valve link (89)
    3. Detent lever (88)
    4. Parking lock actuator assembly (85)
    5. Manual shaft retainer (83)
    6. Manual shaft (84)
    2. Fig 2: Identifying Manual Shaft Seal
    GM59273Courtesy of GENERAL MOTORS CORP.
  2. Remove the manual shaft seal (82) with a screwdriver.
    3. Fig 3: View Of Parking Lock Bracket & Bolt
    GM284393Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components:
    1. The parking lock bracket bolt (87)
    2. The parking lock bracket (86)
scientia non olet · About LEMON Manuals