LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Inner Manual Linkage Installation

Inner Manual Linkage Installation

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Parking Brake Pawl & Return Spring
    GM4191Courtesy of GENERAL MOTORS CORP.
  1. Install the parking lock bracket (86).
    2. NOTE: Refer to Fastener Notice .
  2. Install the parking lock bracket bolt (87).

    Tighten:  Tighten the bolt to 31 N.m (23 lb ft).

  3. Inspect the following items:
    • The parking brake pawl (81) for damage or cracks
    • The parking pawl return spring (80) for being broken or missing
    4. Fig 2: View Of Manual Shaft, Parking Lock Actuator Assembly, Inside Detent Lever & Components
    GM1568380Courtesy of GENERAL MOTORS CORP.
  4. Inspect the following items:
    • The manual shaft retainer (83) for damage or cracks
    • The manual shaft (84) for damage or burrs
    • The parking lock actuator assembly (85) for damage
    • The inside detent lever (88) for damage or cracks
    • The manual valve link (89) for damage
    • The hex head nut (90) for damage or stripped threads
  5. Install the following items:
    • The inside detent lever (88)
    • The parking lock actuator assembly (85)
    • The manual shaft (84) (model dependent)
    • The manual shaft retainer (83)
    • The hex head nut (90)
    • The manual valve link (89)

      Tighten:  Tighten the nut to 31 N.m (23 lb ft).

scientia non olet · About LEMON Manuals