LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 2-4 Servo Disassemble >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

J 22269-01  Accumulator and Servo Piston Remover. See Special Tools .

    Fig 1: Locating Servo Cushion Outer & Inner Spring With Retainer
    GM55932Courtesy of GENERAL MOTORS CORP.
  1. Use a J 22269-01  to compress the second apply piston assembly (17). See Special Tools .
  2. Remove the second apply piston retaining ring (14).
  3. Remove the servo cushion spring retainer (15), the servo cushion outer spring (16) and the servo cushion inner spring (105) (model dependent).
scientia non olet · About LEMON Manuals