LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 2-4 Band Assembly Installation

2-4 Band Assembly Installation

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 2-4 Band Assembly
    GM190436Courtesy of GENERAL MOTORS CORP.
  1. Inspect the 2-4 band assembly (602) for damage or wear.
  2. Install the 2-4 band (602) into the case.
    3. Fig 2: Identifying Band Anchor Pin
    GM1552920Courtesy of GENERAL MOTORS CORP.
  3. Install the band anchor pin (41) into the case.
  4. Index the band to fit the band anchor pin into the band.
scientia non olet · About LEMON Manuals