1-2 Accumulator Disassemble
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
- Remove the 1-2 inner (104) and outer (54) accumulator springs.
IMPORTANT:
Some models may not use an outer 1-2 accumulator spring (54).