LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Transfer Case - NVG 246-NP8) >> Diagnostic Information and Procedures >> Transfer Case Grating Noise

Transfer Case Grating Noise

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Transfer Case Grating Noise

Cause Correction
DEFINITION: A faulty internal transfer case component that causes a grating noise in the transfer case while in the AWD, 4HI, or 4LO mode.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Broken clutch apply plate
  1. Inspect for a broken clutch apply plate. Refer to Transfer Case Disassemble  and Transfer Case Assemble .
  2. Replace the apply plate and the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble  and Transfer Case Assemble .
Faulty clutch pressure plate bearing
  1. Inspect for a faulty clutch pressure plate bearing. Refer to Cleaning and Inspection .
  2. Recondition the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble  and Transfer Case Assemble .