LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Transfer Case - NVG 246-NP8) >> Diagnostic Information and Procedures >> DTC B0770 >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The All Wheel Drive (AWD) indicator circuit consists of an indicator lamp feed circuit and an AWD indicator lamp control circuit. When the AWD mode has been selected, current is supplied to the AWD indicator lamp by the indicator lamp feed circuit, traveling through the AWD indicator lamp LED, at which time the transfer case shift control module supplies the ground through the AWD indicator lamp control circuit.

scientia non olet · About LEMON Manuals