LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1335 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a scan tool to clear the current and history diagnostic trouble code.
  2. Ignition ON, while observing the scan tool for DTCs, operate the seat adjuster switch in both directions for each directional motor.
  3. Disconnect the suspect seat motor for which the DTC set.
  4. Clear the current and history diagnostic trouble code.
  5. While observing the scan tool for DTCs, operate the suspect seat motor adjuster switch in both directions.
    • If the DTC set current or history, test the motor control circuits for a short to ground, or an open/high resistance. If the circuits test normal, replace the memory seat module.
  6. If all circuits/connections test normal, replace the seat motor.
scientia non olet · About LEMON Manuals