Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Note the vent hose routing to aid installation.

Raise and support the vehicle.

Fig 1: Vent Hose & Rear Axle

Courtesy of GENERAL MOTORS CORP.

Remove the vent hose (1) from the top of the rear axle (2).

Fig 2: Vent Hose & Frame Clip

Courtesy of GENERAL MOTORS CORP.

Remove the vent hose (1) from the clip (2) on the frame.

Fig 3: Vent Hose & Filler Hose Clamp

Courtesy of GENERAL MOTORS CORP.

Remove the vent hose (1) from the clamp (2) on the filler hose.