Rear Axle Shaft Seal and/or Bearing Replacement (9.5 HD Axle): Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 8092 Universal Driver Handle - 3/4 in - 10
- J 2619-01 Slide Hammer
- J 29709 Wheel Bearing Installer (9. See Special Tools .5 inch Axle)
- J 29712 Wheel Bearing Remover (9. See Special Tools .5 inch Axle)
- J 29713 Axle Seal Installer (9. See Special Tools .5 inch Axle)