LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Rear Drive Axle) >> Repair Instructions >> Lubricant Replacement - Rear Drive Axle (8.6 Inch Axle) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Axle Cover & Bolts
    GM1689173Courtesy of GENERAL MOTORS CORP.
  1. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement .
  2. Fill the rear axle housing.
  3. Fig 2: View Of Rear Axle Fill Plug
    GM1689720Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Install the fill plug.

    Tighten:  Tighten the fill plug to 33 N.m (24 lb ft).