Locking Differential Clutch Disc Assembly - Assemble (8.6 Inch Axle)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Locking Differential Clutch Disc Assembly (8.6 Inch Axle)

Courtesy of GENERAL MOTORS CORP.

Apply axle lubricant, GM P/N 12378261 (Canadian P/N 10953455) or equivalent meeting GM Specification 9986115, to the surface of each disc.
Assemble the right side or bell-end side clutch disc assembly as follows:
1. Install the two-sided carbon eared disc (2) to the side gear (1).
2. Install the 1st splined disc (4).
3. Install the 2nd splined disc (5).
4. Install the one-sided carbon eared disc (6).
5. Install the guide clips (3) to the clutch discs (2, 4-6).
  Apply chassis grease, GM P/N 12377985 (Canadian P/N 88901242) or equivalent, to the guide clips in order to hold the clips in place on the disc ears.