LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front (1500 Series) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Hub & Bearing Assembly
    GM1728956Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Align the relief in the forward edge of the disc brake splash shield with the steering arm on the steering knuckle.
  1. Install the splash shield to the steering knuckle.
  2. Install the wheel hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (1500 Series) or Wheel Hub, Bearing, and Seal Replacement (2500 Series) .
scientia non olet · About LEMON Manuals