LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Wiper Transmission Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wiper Transmission Bolts & Electrical Connector
    GM837474Courtesy of GENERAL MOTORS CORP.
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  2. Remove the bolts (1) retaining the transmission to the vehicle.
  3. Disconnect the wiper motor electrical connector (2).
  4. Remove the wiper transmission from the vehicle.
scientia non olet · About LEMON Manuals