LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Wiper Arm Replacement >> Removal Procedures

Removal Procedures

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wiper Arm
    GM837384Courtesy of GENERAL MOTORS CORP.
  1. Lift the wiper arm (1) and raise approximately 2 inches from the glass.
  2. Release the locking tab at the base of the wiper arm (2) by sliding the tab outwards with a flat bladed tool.
  3. With a flat-bladed tool, lift the wiper arm off of the post (3).