LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Washer Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the washer solvent container. Refer to Washer Solvent Container Replacement .
    2. Fig 1: Identifying Washer Pump
    GM869089Courtesy of GENERAL MOTORS CORP.
  2. Remove the washer pump from the washer solvent container by gently prying the pump from the container using 2 flat-bladed tools.
  3. Remove the washer pump.
  4. Discard the washer pump grommet.
scientia non olet · About LEMON Manuals