Installation Procedure
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the washer hose (1) to the liftgate (2).
- Secure the washer hose to the washer nozzle (5).
- Secure the washer hose to the electrical harness (9).
- At the right side of the liftgate, secure the washer hose (12) to the washer nozzle hose (1).
- Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .