LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Washer Hose Replacement - Headliner >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headliner Washer Hose
    GM869377Courtesy of GENERAL MOTORS CORP.
  1. Lay the new washer hose in place next to the original to ensure proper routing (1), and epoxy the new washer hose to the headliner and to the original washer hose.
  2. Install the headliner. Refer to Headlining Trim Panel Replacement .