LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Air Inlet Grille Panel Replacement - Non Functional >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Grille Panel
    GM825299Courtesy of GENERAL MOTORS CORP.
  1. Release the retainer clips on the air inlet grill panel from the vehicle by applying upward pressure to the panel.
  2. Remove the air inlet grille panel from the vehicle.
scientia non olet · About LEMON Manuals