LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wipers And Washers) >> Repair Instructions >> Air Inlet Grille Panel Replacement - Non Functional >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Grille Panel
    GM825299Courtesy of GENERAL MOTORS CORP.
  1. Position the air inlet grille panel to the vehicle.
  2. Install the air inlet grille panel to the vehicle by applying downward pressure to the panel until fully seated.
scientia non olet · About LEMON Manuals