LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Hydraulic Brake System) >> Diagnostic Information and Procedures >> Brake Pedal Excessive Travel

Brake Pedal Excessive Travel

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pedal Excessive Travel

Step Action Yes No
1 Were you sent here from the Hydraulic Brake Symptom Table? Go to Step 2  Go to Diagnostic Starting Point - Hydraulic Brakes 
2 Inspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .
Is the brake pedal travel distance within the acceptable limits?		 Go to Step 5  Go to Step 3 
3
  1. Inspect for worn, missing, misaligned, bent or damaged brake pedal system components.
    • For the brake pedal pushrod component inspection, refer to Brake Pedal Pushrod Inspection  .
    • Inspect the brake pedal bushings for excessive wear and/or damage and inspect the brake pedal for a bent and/or damaged condition.
  2. Replace the brake pedal system components that are worn, missing, misaligned, bent or damaged, refer to the following procedure(s) as necessary.
Did you find and replace any worn, missing, misaligned, bent or damaged brake pedal system components?		 Go to Step 4  Go to Step 5 
4 Reinspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .
Is the brake pedal travel distance within the acceptable limits?		 Go to Step 8  Go to Step 5 
5 Inspect the hydraulic brake system for proper operation. Refer to Hydraulic Brake System Diagnosis .
Did you find and correct a condition?		 Go to Step 8  Go to Step 6 
6 Inspect the disc brake system for proper operation. Refer to Disc Brake System Diagnosis .
Did you find and correct a condition?		 Go to Step 8  Go to Step 7 
7 Inspect the brake assist system for proper operation. Refer to Brake Assist System Diagnosis .
Did you find and correct a condition?		 Go to Step 8  Go to Diagnostic Starting Point - Hydraulic Brakes 
8 Road test the vehicle to confirm proper operation. Refer to Brake System Vehicle Road Test .
Is the condition still present?		 Go to Step 2  System OK
scientia non olet · About LEMON Manuals