LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Seat Heating System & Seat Cooling System) >> Visual Identification >> Heated/Cooled Seat Connectors >> Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Connector End View
GM1664607Courtesy of GENERAL MOTORS CORP.
Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Connector Parts Information

Connector Part Information 
  • OEM: E3578-003
  • Service: See Catalog
  • Description: 8-Way M (BK)
Terminal Part Information 
  • Terminal/Tray: TBD
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 D-GN 6195 Driver Seat Cushion Heated/Cool Ventilation Module Heat Control
2 D-GN 5198 Driver Seat Blower Voltage Reference
3 PU 6196 Driver Seat Cushion Heated/Cool Ventilation Module Cool Control
4 GY 5912 Low Reference
5 YE/BK 2079 Driver Seat Cushion Temperature Sensor Signal
6 - - Not Used
7 OG 7009 Driver Seat Cushion Blower Speed Control
8 YE 2080 Low Reference
scientia non olet · About LEMON Manuals