LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Seat Heating System & Seat Cooling System) >> Visual Identification >> Heated/Cooled Seat Connectors >> Seat Back Ventilation Heat & Cool Module - Driver (KB6)

Seat Back Ventilation Heat & Cool Module - Driver (KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Back Ventilation Heat & Cool Module - Driver (KB6) Connector End View
GM1554145Courtesy of GENERAL MOTORS CORP.
Seat Back Ventilation Heat & Cool Module - Driver (KB6) Connector Parts Information

Connector Part Information 
  • OEM: E3575-001
  • Service: See Catalog
  • Description: 8-Way F 1.5mm Unsealed (BK)
Terminal Part Information 
  • Terminal/Tray: TBD
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
Seat Back Ventilation Heat & Cool Module - Driver (KB6) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 BN 6193 Driver Seat Back Heated/Cool Ventilation Module Heat Control
2 D-GN 5918 Driver Seat Blower Voltage Reference
3 OG 6194 Driver Seat Back Heated/Cool Ventilation Module Cool Control
4 GY 5912 Low Reference
5 D-BU 2425 Driver Seat Back Temperature Sensor Signal
6 - - Not Used
7 TN 7010 Driver Seat Back Blower Speed Control
8 PK 2426 Low Reference
scientia non olet · About LEMON Manuals