Module Replacement - Ventilation Heat and Cool - Passenger Seat Cushion (Escalade w/KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Passenger Heated Seat Module & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front passenger seat. Refer to Front Seat Replacement - Bucket . Remove the passenger seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
1	Passenger Heated Seat Module Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Passenger Heated Seat Module Tip: Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Remove the front passenger seat. Refer to Front Seat Replacement - Bucket .
Remove the passenger seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .

Passenger Heated Seat Module Nut (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Passenger Heated Seat Module
Tip: Disconnect the electrical connector.