LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Data Communication System) >> Diagnostic Information and Procedures >> DTC B1001 >> Circuit/System Verification >> DTC B1001 00

DTC B1001 00

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Program the body control module (BCM). Refer to Service Programming System (SPS)

DTC B1001 45

  1. Program the restraints ID into the BCM.
  2. Retrieve DTCs from the BCM. DTC B1001 45 should change to a history DTC.
    • If the DTC remains current, replace the BCM.

DTC B1001 4B

  1. Program the tire/axle RPO into the BCM.
  2. Retrieve DTCs from the BCM. DTC B1001 4B should change to a history DTC.
    • If the DTC remains current, replace the BCM.