LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiring Systems And Power Management - Troubleshooting & Diagnosis) >> SIR/SRS Wiring Repairs >> Tools Required >> SIR/SRS Connector Repair (Plastic Body and Terminal Metal Pin)

SIR/SRS Connector Repair (Plastic Body and Terminal Metal Pin)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The terminals in the SIR/SRS system are made with a special plating. This plating provides the necessary contact integrity for the sensitive, low energy circuits. Use theJ-38125  SIR/SRS Terminal Repair Kit for repairing SIR/SRS terminals and connectors. See Special Tools . Do not substitute any other terminals for those in the repair kit.

The J-38125  SIR/SRS Terminal Repair Kit contains: See Special Tools .

Pigtail repair packs are available for SIR/SRS connectors with eight or less terminals. Only the connector body is available for connectors with more than eight terminals. The terminated leads in the J-38125  SIR/SRS Terminal Repair Kit can be used to replace damaged terminals when replacing the connector body. See Special Tools .