LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Adjustable Pedal System) >> Component Locator >> Adjustable Pedal Connectors >> Electronic Adjustable Pedal Assembly

Electronic Adjustable Pedal Assembly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Adjustable Pedal Assembly Connector End View
GM1711022Courtesy of GENERAL MOTORS CORP.
Electronic Adjustable Pedal Assembly Connector Parts Information

Connector Part Information 
  • OEM: 15477860
  • Service: See Catalog
  • Description: 6-Way F BFC 180 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 173630-7/7
  • Core/Insulation Crimp: Pins 1-3: E/4
  • Core/Insulation Crimp: Pins 4-5: E/A
  • Release Tool/Test Probe: 15315247/J-35616-33 (YE)
Electronic Adjustable Pedal Assembly Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 TN 6207 5-Volt Reference (AN3)
2 PK 5289 Adjustable Pedal Sensor Signal (AN3)
3 GY 6206 Low Reference (AN3)
4 YE 5129 Adjustable Pedal Motor Rearward Control
5 PU 5130 Adjustable Pedal Motor Forward Control
6 - - Not Used
scientia non olet · About LEMON Manuals