LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Tires And Wheels) >> Repair Instructions >> Tire Repair >> Final Inspection

Final Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Checking Both Beads, Repair & Valve
    GM1407469Courtesy of GENERAL MOTORS CORP.
  1. After remounting and inflating the tire, check both beads, the repair and the valve with a water and soap solution in order to detect leaks.
  2. If the tire continues to lose air, the tire must be demounted and reinspected.
  3. Balance the tire and wheel assembly. Refer to Tire and Wheel Assembly Balancing - Off Vehicle .

For additional tire puncture repair information, contact:

Rubber Manufacturers Association (RMA)

1400 K Street, N.W., Suite 900

Washington

DC

20005-2403

Telephone: 202-682-4800

E-mail: informa.org

Website: www.rma.org