LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Front Drive Axle) >> Repair Instructions >> Vent Hose Connector Replacement - Front Drive Axle (9.25 Inch Axle) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Vent Hose To Differential Carrier Assembly
    GM834272Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the vent hose from the vent hose connector.
    3. Fig 2: View Of Vent Hose Connector
    GM847064Courtesy of GENERAL MOTORS CORP.
  3. Remove the vent hose connector from the differential carrier assembly.
scientia non olet · About LEMON Manuals