LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Front Drive Axle) >> Repair Instructions >> Bracket Replacement (25 Series) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (1500 4WD)  or Differential Carrier Assembly Replacement (2500 4WD) .
  3. Remove the air conditioning compressor-4.8 L, 5.3 L and 6.0 L engines. Refer to Compressor Replacement in Heating, Ventilation and Air Conditioning.
    4. Fig 1: View Of Front Axle Mounting Bracket (25/35 Series)
    GM365933Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts and the washers from the bracket.
  5. Remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals