Fuel Tank Filler Pipe Replacement (2500 Series): Assemble

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Hose Components

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Fuel tank fill hose clamp (12)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
Fuel tank fill pipe (11)
Evaporative emission canister hose clip (10)
Fuel tank fill hose clamp (9)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
Fuel tank vent hose (8)
Fuel tank fill pipe clamp (7)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
Fuel tank fill pipe restrictor (6)
Fuel tank fill pipe housing (5)
Fuel tank fill pipe housing bolts (4)
Tighten: Tighten the bolts to 2.3 N.m (20 lb in).
Fuel tank fill pipe clamp (3)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
Evaporative emission canister hose clamp (2)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
Evaporative emission canister hose (1)