LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L And 6.2L - Introduction (2 Of 2)) >> Component Locator >> Engine Controls Connectors >> Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LY6)

Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LY6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LY6) Connector End View
GM280761Courtesy of GENERAL MOTORS CORP.
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LY6) Connector Parts Information

Connector Part Information 
  • OEM: 12160825
  • Service: 15305801
  • Description: 4-Way M Metri-Pack 150 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12045773/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-3 (GY)
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LY6) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A TN 1664 HO2S Low Signal - Bank 1 Sensor 1
B PU/WH 1665 HO2S High Signal - Bank 1 Sensor 1
C GY/WH 3113 HO2S Heater Low Control - Bank 1 Sensor 1
D PK 539 Ignition 1 Voltage
scientia non olet · About LEMON Manuals