LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L And 6.2L - Introduction (2 Of 2)) >> Component Locator >> Engine Controls Connectors >> Camshaft Position (CMP) Sensor (LY6, L76, L92)

Camshaft Position (CMP) Sensor (LY6, L76, L92)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor (LY6, L76, L92) Connector End View
GM516611Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor (LY6, L76, L92) Connector Parts Information

Connector Part Information 
  • OEM: 12059595
  • Service: 88986451
  • Description: 3-Way F Metri-Pack 150 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12048074/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
Camshaft Position (CMP) Sensor (LY6, L76, L92) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A D-BU 6259 5-Volt Reference
B BN 6266 Low Reference
C D-BU/WH 6265 CMP Sensor Signal
scientia non olet · About LEMON Manuals