LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Rear Auxiliary Weatherstrip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear side door.
  2. Fig 1: View Of Luggage Carrier Side Rail, Weatherstrip, Auxiliary Weatherstrip
    GM1486507Courtesy of GENERAL MOTORS CORP.
  3. Starting at the bottom of the rear door, pull the rear door auxiliary weatherstrip (3) forward in order to remove the weatherstrip from the pinch-weld flange.
  4. Release the upper auxiliary weatherstrip (3) approximately 2 inches from the luggage carrier side rail.
  5. Complete removing the rear door auxiliary weatherstrip.