LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: To retain proper alignment, properly support the door and replace the hinges one at a time if possible.
    Fig 1: Vehicle Hinge Fasteners
    GM838512Courtesy of GENERAL MOTORS CORP.
  1. Open the door.
  2. Mark the hinge location with a grease pencil prior to removal.
  3. Remove the 3 fasteners (1) retaining the hinge to the vehicle.
    4. Fig 2: Rear Door Hinge Fasteners
    GM838521Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 fasteners (1) retaining the hinge to the door.
  5. Remove the hinge.
scientia non olet · About LEMON Manuals